Hose Couplings
We stock many hose couplings including king combination nipples, pin lug couplings, hose menders, spray nozzles, strainers, skimmers and more. A hose coupling is a connector on the end of a hose to connect (or couple) it with another hose or with a tap or a hose appliance, such as an irrigation sprinkler.
-
150 LB ASA Forged Lap Joint Flanges
-
150 LB ASA Forged NPT Threaded Flanges
-
Flange Gaskets
-
Notched NOS Threaded Stem
-
Notched Turned Back Nipple
-
Foot Valve Parts and Assemblies
-
Gruvlok Lightweight Flexible Couplings
-
Gruvlok Gaskets
-
Jump-sized King Nipples
-
316 Stainless Steel NPT Threaded King Nipples
-
Brass NPT Threaded King Nipples
-
Plated Steel NPT Threaded King Nipples
-
Pin Lug Couplings
-
Plated Hose Menders
-
Spray Nozzles
-
Bottom Round Hole Skimmers
-
Long Thin Round Hole Strainers
-
Standard Round Hole Strainers
-
Standard Square Hole Strainers
-
Top Round Hole Skimmers
150 LB ASA Forged Lap Joint Flanges
We stock 150 lb. lap joint flanges used for joining two pieces of pipe or connecting valves in a piping system.
Notched NOS Threaded Stem
We stock notched NOS threaded male stems in carbon steel and stainless steel in sizes ranging from 3" to 8". Recommended for use where lower pressures are encountered.
Foot Valve
Flapper Assembly
We carry replacement flapper assemblies for your cast iron threaded foot valves ranging from 1-1/2” to 4” in a red paint. The flapper valve controls & stops flow of suction power from the piping system.
Rubber Foot Valves
We carry replacement valves for your cast iron threaded foot valves ranging from 1-1/2” to 4” in rubber. The valve helps prevent air from escaping which keeps the foot valve working properly, preventing debris from entering your piping system.
Gruvlok x Weld Nipples
We stock gruvlok x weld nipples in nominal sizes ranging from 2" to 4" in carbon steel and 316 stainless steel. These fittings are designed to provide minimum pressure drop and uniform strength. They also feature a groove in the middle of fitting for a easy locking mechanism.
Brass NPT Threaded King Nipples
Our brass NPT threaded end nipples range from 1/2” to 3”. These nipples are most commonly used in trash pump suction and discharge hose assemblies.
Female King Short Shank Pin Lug Couplings
We stock many configurations when it comes to female king short/long shank pin lug couplings, or (king short/long shank suction couplings). These couplings rang from 1 1/2" to 6" in size with NPSM threads. They come in aluminum shanks with brass nuts, brass shanks with brass nuts, steel shanks with iron nuts, and plated Steel shanks with brass nuts.
Plated Hose Menders
We stock plated hose menders in steel, 316 stainless steel, & brass. We have sizes ranging from 3/8" to 6". The purpose of a hose mender is to reform or repair the hose to mend one's ways.
Long Thin Round Hole Strainers
We stock 1-1/2" to 4" long thin round hole strainers. These strainers helps prevent debris from entering a suction line and are zinc plated steel.
Standard Square Hole Strainers
We stock 1-1/2" to 4" standard square hole strainers. These strainers helps prevent debris from entering a suction line and are zinc plated steel.
150 LB ASA Forged NPT Threaded Flanges
We stock 150 lb raised face NPT threaded flanges used for joining two pieces of pipe or connecting valves in a piping system.
Notched Turned Back Nipple
We stock notched turned back nipples in carbon steel and stainless steel in sizes ranging from 3" to 6". These notched turned back nipple stems are for use with lap joint flanges.
Foot Valves Seat Plate
We carry replacement seat plates for your cast iron threaded foot valves ranging from 1-1/2” to 4”. The seat plates helps prevent air from escaping which keeps the foot valve working properly, preventing debris from entering your piping system.
Gruvlok Gaskets
We stock gaskets for gruvlok clamp couplings in sizes ranging from 2" to 8" in black buna-n and EPDM.
Jumpsized King Nipples
Our jumpsize king nipples ranges from 3/4" to 4" in hose shank. The purpose for these nipples is for those who have a smaller or bigger hose, which requires a different size hose shank than the threaded end of the nipple. This nipple is constructed of steel and has a plated coating applied to it; also in a 316 stainless steel.
Plated Steel NPT Threaded King Nipples
Our plated steel NPT threaded end nipples range from 1/2” to 3”. These nipples are most commonly used in trash pump suction and discharge hose assemblies.
Male King Short Shank Pin Lug Couplings
We stock many configurations when it comes to male king short/long shank pin lug couplings, or (king short/long shank suction couplings). These couplings rang from 1-1/2" to 6" in size with NPSM threads. They come in aluminum shanks, brass shanks, steel shanks, and plated steel shanks.
Spray Nozzles
We stock brass nozzles, polycarbonate nozzles, garden hose nozzles, and many more nozzles in all configurations.
Polyethylene Strainers
We stock 1-1/2" to 3" polyethylene strainers. These strainers help prevent debris from entering a suction line and are black polyethylene.
Top Round Hole Skimmers
We stock 2" to 3" top round hole skimmers. These skimmers help prevent debris from entering a suction line and are zinc plated steel.
Flange Gaskets
We stock flange gaskets in sizes 3" to 8" and sized to fit flat face and raised face flanges.
Foot Valves Assemblies
We carry assembled cast iron threaded foot valves ranging from 1-1/2” to 4” NPT female threads in a red paint. The purpose of a foot valve is to maintain pump prime between pumping cycles. The strainer prevents debris from entering the piping system and causing a clog.
Foot Valve
Strainer
We carry replacement strainers for your cast iron threaded foot valves ranging from 1-1/2” to 4” NPT female threads in a red paint. The strainer prevents debris from entering the piping system and causing a clog.
Gruvlok Lightweight Flexible Couplings
We stock gruvlok lightweight flexible coupling in sizes ranging from 2" to 6" in ductile iron. These are lightweight and flexible, Series L Style10.
316 Stainless Steel NPT Threaded King Nipples
Our 316 stainless steel NPT threaded end nipples range from 1/2” to 3”. These nipples are most commonly used in trash pump suction and discharge hose assemblies.
Complete King Short Shank Pin Lug Couplings
We stock complete king short pin lug couplings, or (king short shank suction couplings). These couplings rang from 1-1/2" to 6" in size with NPSM threads. They come in aluminum shanks with brass nuts.
Pin Lug Spanner Wrench
We stock pin lug spanner wrenches for pin lug couplings. These spanner wrenches will work for 1-1/2" to 4" pin lug couplings. These are plated iron and single end.
Bottom Round Hole Skimmers
We stock 1-1/2" to 3" bottom round hole skimmers. These skimmers help prevent debris from entering a suction line and are zinc plated steel.
Standard Round Hole Strainers
We stock 1-1/2" to 6" standard round hole strainers. These strainers helps prevent debris from entering a suction line and are zinc plated steel.