google-site-verification=38vDnmY4hPKeOtpBLjcfcIA_VigvwkKxPSJFKS2A7ss Thor Interchange - 3/4" Female Coupler - Dual Lock - P Series - Steel | Industrial Supply
top of page

PFLS12 1/2" x 3/4" FPT dual lock P series Thor interchange female thread coupler. Machined components are manufactured using solid bar stock. Nitrile (buna-N) seals standard. Stainless steel retaining ring and spring maximize corrosion resistance and extend service life on the 1 piece sleeve. 2 piece sleeve has a phosphor bronze spring. Steel componentry is plated using ROHS compliant trivalent chrome. Zinc cast sleeve. Thor finger lock interchange. Interchanges with National A type, campbell double-lock Thor and PHC series coupling.

 

Safety Notes!!
It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling , to prevent damage to the coupling. To protector the operator, safety devices such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.

Warning: This product contains a chemical known to the state of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling. 

Thor Interchange - 3/4" Female Coupler - Dual Lock - P Series - Steel

SKU: 4PF6
$30.19Price
    • PFLS12 1/2" x 3/4" FPT dual lock P series Thor interchange female thread coupler.
    • Machined components are manufactured using solid bar stock. Nitrile (buna-N) seals standard.
    • Stainless steel retaining ring and spring maximize corrosion resistance and extend service life on the 1 piece sleeve.
    • 2 piece sleeve has a phosphor bronze spring. Steel componentry is plated using ROHS compliant trivalent chrome.
    • Zinc cast sleeve.
    • Thor finger lock interchange.
    • Interchanges with National A type, campbell double-lock Thor and PHC series coupling.

    Safety Notes!!
    It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling , to prevent damage to the coupling. To protector the operator, safety devices such as a safety check valve and safety cable should be installed in case there is a hose or coupling failure.

    Warning: This product contains a chemical known to the state of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling. 

bottom of page