google-site-verification=38vDnmY4hPKeOtpBLjcfcIA_VigvwkKxPSJFKS2A7ss
 

PHLS06 1/2" x 3/8" HB, dual lock P series Thor interchange hose barb coupler. Machined components are manufactured using solid bar stock. Nitrile (buna-N) seals standard. Stainless steel retaining ring and spring maximize corrosion resistance and extend service life on the 1 piece sleeve. 2 piece sleeve has a phosphor bronze spring. Steel componentry is plated using ROHS compliant trivalent chrome. Zinc cast sleeve. Thor finger-lock interchange. Interchanges with National A type campbell double-lock and Thor PHC series couplings. 

 

Safety Notes!!
It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling to prevent damage to the coupling. To protect the operator, safety devices such as a safety check valve ans safety cable should be installed in case there is a hose or coupling failure. 

Warning: This product contains a chemical known to the state of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling. 

Thor Interchange - 3/8" Hose Barb - Dual Lock - P Series - Steel

SKU: PHLS06
$22.75Price
    • PHLS06 1/2" x 3/8" HB, dual lock P series Thor interchange hose barb coupler.
    • Machined components are manufactured using solid bar stock.
    • Nitrile (buna-N) seals standard.
    • Stainless steel retaining ring and spring maximize corrosion resistance and extend service life on the 1 piece sleeve.
    • 2 piece sleeve has a phosphor bronze spring.
    • Steel componentry is plated using ROHS compliant trivalent chrome.
    • Zinc cast sleeve.
    • Thor finger-lock interchange.
    • Interchanges with National A type campbell double-lock and Thor PHC series couplings. 

     

    Safety Notes!!
    It is important to be safe when installing quick disconnect couplings into a pneumatic circuit. Never install a pneumatic coupling directly into an air tool, use a piece of hose that is at least 18" long, between the tool and the coupling to prevent damage to the coupling. To protect the operator, safety devices such as a safety check valve ans safety cable should be installed in case there is a hose or coupling failure. 

    Warning: This product contains a chemical known to the state of California to cause birth defects or other reproductive harm. Do not use in connection with drinking water. Wash hands after handling.